Glass lined Dryer
Principle:Confined to the surface of thermal-energy (such as hot
water or low pressure steam the HTF), the heat was passed in the
shell dry materials.
In the drive, as slowly rotating the tank, the tank materials
continuously mixed, so as to achieve the purpose of strengthening
Materials in a vacuum, steam decline in the material surface water
(solvent) reached saturation point and evaporation, and the vacuum
pump from the timely recovery. Materials internal water (solvent)
continuously to the surface infiltration, evaporation from the
three ongoing process, the material in a very short time to dry
Application:Apply chemical, pharmaceutical, food and other
industries powdery, granular and fiber concentration, mixing,
drying and low-temperature drying of materials needed (such as
biological and chemical products, etc.), applicable to more easily
oxidized, volatile, thermosensitive strongly stimulate , toxic
materials and not undermine crystal materials drying.
Product Features:Heating oil, automatic temperature control, can be
dry and biochemical products and mineral raw materials, the
temperature can be 20 to 160 ℃.
Thermal efficiency higher than the general oven raise more than two
Indirect heating, the material will not be contaminated, with "GMP"
requirement. Equipment maintenance is simple, easy to keep clean.
Model recommended resettlement process: solvent recovery process
Note:Motor selection can be based on customer demands speed motor
speed from 0 to 6 rpm; proportion of the above technical parameters
of materials by 0.6 g/cm3, if exceeded, orders required by the
users For Pressure Vessels certificates required by orders;
flammable materials such as, when orders, whichever is the